Ticket 1 – OSPF Authentication

1.Client is unable to ping R1’s serial interface from the client.

Problem was disable authentication on R1, check where authentication is not given under router ospf of R1. (use ipv4 Layer 3)

Configuration of R1:

interface Serial0/0/0
 description Link to R2
 ip address 10.1.1.1 255.255.255.252
 ip nat inside
 encapsulation frame-relay
 ip ospf message-digest-key 1 md5 TSHOOT
 ip ospf network point-to-point
!
router ospf 1
 router-id 1.1.1.1
 log-adjacency-changes
 network 10.1.2.0 0.0.0.255 area 12
 network 10.1.10.0 0.0.0.255 area 12
 default-information originate always
!

Configuration of R2:
interface Serial0/0/0.12 point-to-point
 ip address 10.1.1.2 255.255.255.252
 ip ospf authentication message-digest
 ip ospf message-digest-key 1 md5 TSHOOT
!

Answer: on R1 need command “ip ospf authentication message-digest”

Ans1) R1
Ans2) IPv4 OSPF Routing
Ans3) Enable OSPF authentication on the s0/0/0 interface using the “ip ospf authentication message-digest” command.