Ticket 2 – HSRP Track

HSRP was configured on DSW1 & DSW2. DSW1 is configured to be active but it does not become active.

Configuration of DSW1:

track 1 ip route 10.2.21.128 255.255.255.224 metric threshold
threshold metric up 1 down 2
!
track 10 ip route 10.1.21.128 255.255.255.224 metric threshold
threshold metric up 63 down 64
!

interface Vlan10
ip address 10.2.1.1 255.255.255.0
standby 10 ip 10.2.1.254
standby 10 priority 200
standby 10 preempt
standby 10 track 1 decrement 60

Answer: (use IPv4 Layer 3 Topology)

On DSW1 interface vlan 10 mode, type these commands:
no standby 10 track 1 decrement 60
standby 10 track 10 decrement 60
(ip for track command not exact for real exam)

Note: 10.1.21.129 is the IP address of a loopback interface on R4. This IP belongs to subnet 10.1.21.128/27.

Ans1) DSW1
Ans2) HSRP
Ans3) delete the command with track 1 and enter the command with track 10 (standby 10 track 10 decrement 60).